Lorex NR800 Series, Instruction Manual, Page: 155 / 180

DDNS Setup (Advanced) 20
9. Click and drag Default Group to the display window to open your cameras in live
view.
Result
20.2 DDNS Setup—Access your System Remotely over the Internet
Setting up DDNS connectivity allows you to view your system from any computer or com-
patible mobile device with Internet access.
To set up remote connectivity with your system, you must:
1. Port forward the HTTP port (default: 80 ) and Client port (default: 35000 ) on your
router to your system’s IP address.
2. Create a DDNS account.
3. Enable DDNS on the system.
4. Test the remote connection by entering your DDNS address in the client software.
20.2.1 Step 1 of 4: Port Forwarding
You must port forward the HTTP port (default: 80 ) and Client port (default: 35000 ) on
your router to your system’s IP address before you can remotely connect to your system.
There are several methods to port forward your router:
• Use the Auto Port Forwarding Wizard (PC only) to port forward the required ports
(see www.lorextechnology.com for details). For instructions, see the Auto Port For-
ward Wizard manual on www.lorextechnology.com .
• Manually port forward the required ports on your router to your system’s IP address by
following your router manufacturer’s instructions. For more information on port for-
warding, see the reference guides on
www.lorextechnology.com .
NOTE
If the above ports are not forwarded on your router, you will not be able to access your system remotely.
#LX400021; r. 4.0/30344/30494; en-US 145