www.lorextechnology.com
LW2711AC1 Series Quick Start Guide_R1
Page 2
ConneCtInG CAMeRA PoWeR ADAPtoR
Connect one end of the camera Power Adaptor to the camera and the other end to an electrical outlet.
It’s all on the Web
For detailed setup information,
please refer to your User’s Manual.
For additional information, please
visit our website
www.lorextechnology.com
1. Press
MenU
on the wireless receiver or remote control.
2. From the Main Menu, select
Pairing
and press the
enter button.
3. Select
an
empty
camera channel and press the
enter/
ok button.
note:
If you selected a preassigned camera channel, the
new camera will take the place of the existing camera.
You will need to repeat the pairing process for the existing
camera to pair it back to the system.
4. Following the on-screen prompt, press the
Pair button
on the rear panel of the camera. You have 30 seconds
to press the
PAIR button
on the camera. Once paired,
the camera will be immediately displayed on-screen.
note:
If you do press the Pair button on the camera during
the 30 second pairing window, repeat steps 1~5 to try the
pairing process again.
ADDInG tHe ACCeSSoRy CAMeRA to yoUR SySteM
The Pairing Function assigns each camera to a different
channel on the wireless receiver (connect up to 4
Cameras), and is necessary for configuring additional
cameras. By default the cameras that came with the system
are preassigned to channel no. 1 for camera 1 etc.
note:
It is recommended to pair the Accessory Camera to
the Receiver before permanently mounting the camera. For
detailed information, please check the owners manual for
the complete system available at www.lorextechnology.com
Connect power adaptor to
local 120V AC power outlet
DIGItAL WIReLeSS InDooR/oUtDooR
ACCeSSoRy MotIon CAMeRA
LW2711AC1 SeRIeS - QUICk StARt GUIDe
SIMPLY AWARE
™
AttentIon
: This camera includes an Auto
Mechanical IR Cut Filter. When the camera
changes between Day/Night Lighting, an
audible clicking noise may be heard coming
from the camera. This clicking is normal, and
indicates that the camera filter is working.
Pairing Button
