107
Appendix D: Replacing the Hard Drive
Appendix D: Replacing the Hard Drive
The system comes with a pre-installed SATA hard drive. You can expand the system with a
maximum of two 4TB 3.5" or 2.5" SATA hard drives (for a maximum storage space of 8TB).
NOTE:
It is recommended to use surveillance or security-certified hard drives, which are
designed to be reliable over long periods of time while recording 24/7. Security-certified
hard drives are available at
www.lorextechnology.com
Removing the Hard Drive
Make sure that the power cable has been disconnected before changing the
hard drive.
1
Remove the screws from each side panel (x2) and rear panel (x4) of the cover.
2
Gently slide the cover away from the rear panel and lift off. Be careful of sharp edges.
3
Disconnect the power and data cables.
4
Next remove the hard drive from the housing:
• If your system has a 3.5" hard drive, remove the 4 screws holding the hard drive bracket and
remove the bracket from the DVR. Remove the 4 screws securing the hard drive to the bracket
Summary of Contents for LHD200
Page 16: ...xiv ...
