7. Choose how the system will react when motion is detected:
•
Show Message:
Check to enable an on-screen pop-up when one of your cameras detects
motion. On-screen pop-up shows the channels an event occurred on and the type of event.
•
Send Email:
Check to enable email alerts. You must configure email alerts before you will
be able to receive them (see 14.6.3
, page 61).
•
Record Channel:
Select the channels that will record when motion is detected on the se-
lected channel. Set the length of recording following a video loss event in the
Post_REC
field.
•
PTZ Activation:
Set connected PTZ cameras to start a tour, pattern, or go to a preset
location.
•
Sequence:
Sequence mode will begin. Select the numbered tiles next to this option to in-
clude the corresponding channels in the sequence.
•
Snapshot:
Select the numbered tiles next to this option to save a snapshot of the corre-
sponding channels.
•
Buzzer:
Check to enable the system buzzer.
#LX400111; r. 1.0/55872/56018; en-US
36
