22
User Manual
between Primary and External.
[MENU] + "WATER TEMPERATURE" + [ENTER]
3.1.11
Transducer Setup
The Transducer Setup menu contains settings that does not require frequent
changes.
[MENU] + "TRANSDUCER SETUP" + [ENTER]
Fig. 3.1.11 - Fish Finder Transducer menu
3.1.11.1 Keel Offset
It is the transducer depth offset from the surface. This makes it possible to
measure depth from the surface instead of from the trasducer's location.
3.1.11.2 Calibrate Sound Speed
Allows calibrating the value of Sound Speed in the water, depending on the
water temperature and salinity.
3.1.11.3 Calibrate Water Speed
Allows calibrating the value of Water Speed sensor. The calibration value, in
the range between -10% to +10%, will be applied to the water speed from
the transducer.
3.1.11.4 Calibrate Water Temperature
Allows the calibration on the Water Temperature sensor. Using the readings
from a precise temperature measuring device, insert here a positive/nega-
tive offset to display right value on Fish Finder screens.
3.1.11.5 Calibrate Aux Temperature
Allows the calibration of the Aux Temperature sensor. Using the readings
from a precise temperature measuring device, insert here a positive/nega-
tive offset to display right value on FF screens.
3.1.12
Alarms
The Alarms menu allows you to define additional sonar alarm settings for Fish
Alarm, Shallow Alarm, Depth Alarm and Temperature Upper/Lower/Rate.
[MENU] + "ALARM" + [ENTER]
Fig. 3.1.12 - Fish Finder Alarms menu
3.1.12.1 Shallow Water
Triggers an alarm when depth becomes shallower than the value set.
3.1.12.2 Depth Water
Triggers an alarm when depth becomes deeper than the value set.
