Lorenz FISH PRO HD+ User Manual Download Page 2

Page: 2 / 37

User Manual

Important Information

CAUTION

♦

Please read through this manual before the first operation. If you have

any questions, please contact the Company's customer service or your

local dealer.

♦

The FISH PRO HD

is not built water proof. Please make sure to avoid

water intrusion into the unit. Water damage is not covered by the war-

ranty.

♦

Extensive exposure to heat may result in damage to the FISH PRO HD

♦

Connection to the power source with reversed polarity will damage the

FISH PRO HD

severely. This damage is not covered by the warranty.

♦

The FISH PRO HD

contains dangerous high voltage circuits which only

experienced technicians MUST handle.

WARNING

♦

When plugging in or unplugging a transducer to the

FISH PRO HD

make

sure power is turned off.

NOTE

We will not be liable for errors contained herein, or for incidental or consequential

damages in connection with the performance or use of this material.

Summary of Contents for FISH PRO HD+






































Search results

Summary of Contents for FISH PRO HD+

Reviews:

Related manuals for FISH PRO HD+

Brands by name

Popular brands

Lorenz FISH PRO HD+, User Manual

Search results

Summary of Contents for FISH PRO HD+

Reviews:

Related manuals for FISH PRO HD+

Brands by name

Popular brands