SOMMAIRE
E 11
2.2) Language
The language possibilities are:
- French
- English
2.3) Input
The input configuration is made of:
- Voltage input choice.
- Current input choice (only with standard device).
- Measure response time.
2.4) Network
The wiring options on the network are:
- Alternative: single-phase or balanced three phases with neutral.
- Continuous.
It is also necessary to configure:
- The Potential Transformer ratio,
and on a standard device:
- The Current Transformer ratio (1A/5A input) or external current shunt sensibility (200mV input).
or on a
-Hall
device:
- The Hall sensor current caliber.
2.5) Relays
The device can, by /R1 or /R2 option, provide respectively 1 or 2 independently configurable alarm relays.
Each relay has two operating modes:
- Threshold detection (alarm) or,
- Energy metering (IPL36(-Hall) only).
The
threshold detection
rubric, allows to activate or deactivate the alarm on threshold overrun.
Threshold detection parameters are:
- Monitored value: voltage, current, frequency, on IPL36 and IPL36L.
and active power, reactive power, apparent power, power factor, on IPL36.
- Type of detection: high or low threshold.
- Threshold and hysteresis value.
- Front face adjustment possibility.
- Security.
- Activation and deactivation delays.
If the alarm detection is activated it works in this manner:
-
high threshold
detection: .alarm is activated when measure goes above threshold,
.alarm is removed when measure goes below threshold minus hysteresis.
-
low threshold
detection: .alarm is activated when measure goes below threshold,
.alarm is removed when measure goes above threshold plus hysteresis.
The
Front face threshold adjustment
is authorized by default.
This possibility can be deactivated if the adjustment must be inaccessible in front face, only the visualization is then pos-
sible.
The
security
function allows to choose between the activation or the de-activation of the relay when alarm is activated.
Configuration
