LOOQS MeeBox MB201 User Manual Download | Manualshive

Page: 60 / 76

background image

Page 60

User Guide LOOQS MeeBox Router

5.

Remove the four screws that secure the unused drive sled (near the middle of the
bottom plate) and put them aside. The free drive sled will fall to the work surface.

6.

Turn the MeeBox over again, top-up.

7.

Attach the free drive sled to the bottom of your new hard drive using the four supplied
screws.

8.

Attach the free SATA cable to the hard drive.

9.

Place the hard drive (with attached sled) in the MeeBox, aligning the four screw holes
of the drive sled with the four free screw holes on the bottom plate of the MeeBox
chassis. The drive should be oriented with the SATA port facing toward the rear of the
MeeBox.

10.

While holding the hard drive against the bottom plate of the MeeBox chassis with one
hand, tilt the MeeBox to a vertical position so that the bottom of the chassis is facing
you. Then, making sure the screw holes of the drive sled are aligned with the
corresponding holes on the bottom plate, carefully screw the drive sled screws into the
chassis holes. (You must continue pressing the drive against the chassis with one hand
until two screws are in place.)

11.

Once the drive has been firmly secured to the MeeBox chassis, replace the top cover
and its retaining screws, reconnect all cables and cords, and turn your MeeBox on.

Verifying and formatting the second hard drive

When your MeeBox has finished booting up after the installation of the second hard drive,
check its proper operation using the disk utility:
1.

In your web browser, go to

http://meebox:8090/

, log in, and click

MeeBox Settings

.

2.

Click

Advanced Settings

, then

Management

, then

Disk Utility

.

In the drive table, you should see entries for both

/dev/hdc

(the primary hard drive) and

/dev/hdd

(the second hard drive). The status of both drives should be ―mounted‖.

If you intend to use the second drive as an independent volume, you must format the
drive by clicking the

Format

button in the disk utility. You can format the drive using any of

the following files systems: ext3, ext2, xfs, and FAT32. MeeBox’s default file system is ext3; it

«
...
58
59
60
61
62
...
»

Summary of Contents for MeeBox MB201













































































Reviews:

No comments

Related manuals for MeeBox MB201

Brand: N-Tron Pages: 101

Brand: H3C Pages: 77

Brand: Lucent Technologies Pages: 20

Brand: IBASE Technology Pages: 39

ConnectX-3 Pro MCX349A-XCCN

Brand: Mellanox Technologies Pages: 35

Ultrastar Serv24 S2122-N24-4

Brand: HGST Pages: 36

Brand: eWON Pages: 34

3C8567 - SuperStack II NETBuilder SI 567...

Brand: 3Com Pages: 6

Brand: Billion Pages: 158

Brand: QRS Pages: 11

Barricade SMC7908VoWBRA2

Brand: SMC Networks Pages: 2

Brand: Allied Telesis Pages: 44

593/25, 593/45, 593/TB, RS-422, RS-485

Brand: Patton electronics Pages: 8

Brand: ROBOfiber Pages: 2

Brand: Digi Pages: 22

Brand: Black & Decker Pages: 16

Brand: Black & Decker Pages: 18

Brand: Black & Decker Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands