manualshive.com logo in svg

Loop Telecom Loop-V 4200, User Manual, Page: 60 / 107

Share
Download
Loop Telecom Loop-V 4200 User Manual Download Page 60

Chapter 5 Terminal Operation

5-2

5.2 Information 

Summary

Press “I” for the Information Summary screen.

LOOP V4200-9       === Information Summary ===         09:25:55 0 7 / 1 9 / 2 0 0 0
                                                                                 
Port Alarm  Interface             Software Version
  A  0      FT1-LONG_HAUL         V1.15  12/18/1998
  B  0      FE1-120ohm            V1.15  12/18/1998
  C  0      DTE-V.35              V1.06  11/30/1998
  D
  E
  F
  H
  J
  K
                                                                                 
                                                                                 
                                                                                 
                                                                                 
                                                                                 
                                                                                 
                                                                                 
                                                                                 
                                                                                 
                                                                                 
                                                                                 
<< ESC key to return to previous menu, SPACE key to refresh >>

5.3 System 

Setup

Press “S” for the System Setup screen. Options from here offer MAP, PORT_BACKUP, SYSTEM, CLOCK.
Use the arrow keys and press 

ENTER

 to select a setup item.

LOOP V4200-9           === System Setup ===            09:25:55 07/19/2000
                                                                                 
                                                                                 
                                                                                 
                                                                                 
>> Select System_setup  Type ?  *MAP   PORT_BACKUP   SYSTEM   CLOCK

When “MAP” is selected, the Time Slot Interchange screen appears.

NOTE: Before performing time slot assignment, please see section 3.12 about CAS configuration.

Example 1:
Use arrow keys to move the cursor, and TAB key to roll options.

LOOP V4200-9           === System Setup ( MAP ) ===        09:25:55 07/19/2000
ARROW KEYS: CURSOR MOVE, Please Input: 0~9, BACKSPACE to edit
     PORT A  PORT B  PORT C  

PORT D

  

PORT E

  PORT F  PORT H  

PORT J

  PORT K  PORT Z

TIME FE1     FE1     FE1     FE1     FT1     FXO     FXS     DTE     DTE     INBAND
SLOT NONCAS  NONCAS  CAS     CAS     NONCAS  A-LAW   A-LAW   V.35    V.35
==== ======= ======= ======= ======= ======= ======= ======= ======= ======= =======
  1  d  J 01 d  B 01 d    00 v  F 01 d    00 v  D 01 v  C 03 d  A 01 d  A 03 d    00
  2  d    00 d  B 02 d  J 02 v  F 02 d    00 v  D 02 v  C 04 d  C 02 d  A 04 d    00
  3  d  K 01 d  B 03 v  H 01 v  F 03 d  J 03 v  D 03         d  E 03 d    03 d    00
  4  d  K 02 d  B 04 v  H 02 v  F 04 d    00 v  D 04         d    00 d    00 d    00
  5  d    00 d  B 05 d    00 d  D 05 d    00                 d    00 d    00 d    00
  6  d    00 d  B 06 d    00 d  D 06 d    00                 d    00 d    00 d    00
  7  d    00 d  B 07 d    00 d  D 07 d    00                 d    00 d    00 d    00
  8  d    00 d  B 08 d    00 d  D 08 d    00                 d    00 d    00 d    00
  9  d    00 d  B 09 d    00 d  D 09 d    00                 d    00 d    00 d    00
 10  d    00 d  B 10 d    00 d  D 10 d    00                 d    00 d    00 d    00
 11  d    00 d  B 11 d    00 d  D 11 d    00                 d    00 d    00 d    00
 12  d    00 d  B 12 d    00 d  D 12 d    00                 d    00 d    00 d    00
 13  d    00 d  B 13 d    00 d  D 13 d    00                 d    00 d    00 d    00
 14  d    00 d  B 14 d    00 d  D 14 d    00                 d    00 d    00 d    00
 15  d    00 d  B 15 d    00 d  D 15 d    00                 d    00 d    00 d    00
 

16

  d    00 d  B 16 s    00 

s

    

00

 d    00                 d    00 d    00 d    00

<< ESC key to previous menu, SPACE key to another page >>                 

PAGE1

Summary of Contents for Loop-V 4200












































































































Reviews:

No comments