Chapter 4 Front Panel Operation
4-14
4.5.4.4 PARITY
Press
ENTER
from Console Port Parity menu. To change data parity, use the arrow keys to cycle through to
a desired selection and press
ENTER
.
NOTE:
Any changes to this setting will affect a terminal connected to the Console port.
CONSOLE>BAUD DATA STOP
P
ARITY XONOFF
*NONE EVEN ODD
4.5.4.5 XONOFF
Press
ENTER
from Console Port Xon-Xoff. To change, use the arrow keys to cycle through to a desired
selection and press
ENTER
.
NOTE
: Xon-Xoff flow control will be terminated when SNMP mode is selected
CONSOLE>BAUD DATA STOP PARITY
X
ONOFF
*OFF ON
4.5.5 Store
These menus are used to configure the console port for data rate, data bits, stop bits, parity bit, XON-XOFF
control, interface type, and SNMP control.
MISC>LOCK ERROR_CODE RESET CONSOLE
S
TORE
STORE>STORE RETRIEVE
4.5.5.1 Store
Under the STORE menu, move the cursor to STORE, then press
ENTER
. The LCD will show as below.
STORE>STORE RETRIEVE
STORING
4.5.5.2 Retrieve
Under the STORE menu, move the cursor to RETRIEVE, then press
ENTER
. The LCD will show as below.
STORE>STORE RETRIEVE
RETRIEVING