Chapter 5 Terminal Operation IP6704A TDMoEthernet
Loop Telecommunication International, Inc.
144
5.21.11.3.
Unit Alarm Queue
Press “Q” from Port Menu, to show the screen of Unit Alarm Queue as below.
PORT C G.703 === Alarm Queue === 08:20:39 01/19/2016
1 Port C G.703: CRITICAL LOS--------------------------- 08:20:06 01/19/2016
<< ESC key return to previous menu or SPACE bar to refresh >>
5.21.12.
C37.94(LS-Optical Fiber Card)
Enter "P" to choose a port for LS-Optical Fiber Card. The following screen is LS-Optical
Fiber Card.
PORT D LS-OPTICAL === Port Menu === 07:45:07 01/19/2016
Version : HW FPGA V1(1) PCB Ver.A (2)
Optical module: 820nm M(Mode) N/A(Range) ST
[DISPLAY] [SETUP]
1 -> Port 1-Hour Perf. Report S -> Port Setup
2 -> Port 24-Hour Perf. Report L -> Port Loopback and Test
C -> Port Configuration M -> Port Alarm Setup
I -> Port Status X -> Port Clear Alarm History
H -> Port Alarm History K -> Port Clear Performance Data
[LOG] [MISC]
P -> Choose other Port Y -> Port Load Default Config
F -> Log Off
O -> Log On
E -> Return to Main Menu
>>SPACE bar to refresh or enter a command ===>
5.21.12.1.
Port Status
Under the “Port Menu”, press "I" to view the status of the LS-Optical Fiber interface card.
PORT D LS-OPTICAL === Port Status === 07:55:11 01/19/2016
-- LINE --
LOS : YES
YEL : NO
FRAMING ERROR : 0
PAYLOAD ERROR : 0
-- TEST --
NEAR-END LOOPBACK : OFF
PATTERN TRANSMITTED: OFF
<< ESC key to return to previous menu, SPACE bar to refresh >>