Chapter 5 Terminal Operation IP6704A TDMoEthernet
Loop Telecommunication International, Inc.
138
5.21.9.1.
Port Loopback Setup
Under Port Menu, press “L” to do Loopback Setup, then the screen will show as below.
PORT D SDTE === Port Loopback Test === 13:27:29 01/19/2016
ARROW KEYS : CURSOR MOVE , ENTER KEY : ITEM SELECT
- DTE LOOPBACK : *OFF TO-DTE TO-LINE
<< Press ESC key to return to previous menu or save the setup>>
5.21.9.2.
Port Alarm Setup
To do alarm setup, press “M” from Port Menu, then the following screen will show up.
PORT D SDTE === Port Alarm Setup === 13:29:45 01/19/2016
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
LOCAL
[TYPE] [ALARM]
DTE_ALARM MAJOR
<< Press ESC key to return to previous menu or save the setup>>
5.21.9.3.
Port System Setup
To setup unit system, p
ress “S” from Port Menu, then the following screen will show up.
Use arrow keys to move the cursor, TAB key to roll up options.
PORT D SDTE === Port System Setup === 13:30:28 01/19/2016
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
RATE = 32 X 64K (BANDWIDTH: 2048K)
CLOCK = INVERTED
DATA = NORMAL
RTS = PERMANENT
TTM = OFF
V.54 = OFF
INTERF= V.35
<< Press ESC key to return to previous menu or save the setup>>
5.21.9.4.
Port Clear Alarm Queue & History Setup
Under Port Menu, press “X” to clear alarm queue and history. A prompt will ask if you are
sure to clear the alarm queue. Press “Y” to confirm.
PORT D SDTE === Port Menu === 13:25:04 01/19/2016
Version : SW V5.03.01 (0131)
HW:VER.C FPGA:V3(1)
[DISPLAY] [SETUP]
C -> Port System Setup Display L -> Port Loopback Setup
H -> Port Alarm History M -> Port Alarm Setup
I -> Port Status S -> Port System Setup
Q -> Port Alarm Queue X -> Port Clear Alarm Queue & History
G -> File Transfer
[LOG] [MISC]
P -> Choose other Port Y -> Port Load Default Config
F -> Log Off Z -> Port Reset
O -> Log On
E -> Return to Controller Main Menu
>> C lea r a lar m q ueu e - ar e y ou sur e ? [Y /N]