background image

19

9. Warranty Conditions

For the haze machine 

Unique

2

 Look‘ guarantee is:

1. Free of charge, subject to the following conditions (No. 2 - 6) we will repair any defect or

fault in the unit if it is caused by a proven factory fault and has been advised immediately
after appearance and within 12 months of delivery to the end user. Insignificant deviations
of the regular production quality does not guarantee replacement rights, nor do faults
or  defects  caused  by  water,  wrong  fog  fluid,  by  generally  abnormal  environment
conditions or Force Majeure.

2. Guarantee Service will be done in the following way: Faulty parts will be repaired or

replaced (our chioce) with correct parts. Faulty units have to be brought to us or our
service  centres  or  to  be  sent  to  us  or  our  service  centres  at  customer‘s  expenses.  The
invoice and/or receipt showing the purchase date and the serial number has to come
with the faulty unit, otherwise this will not be guarantee service. Replaced parts become
our property.

3. The customer loses all rights for guarantee services, if any repairs or adjustments are

done to the units by unauthorized persons and/or if spare parts are used which are nor
approved by us. The right of guarantee service is also lost if fluids other than the original
„UNIQUE-fluid“ have been used or if units are sent to us with full fluid bottles. Also non
compliance with the instructions in this manual or mistakes by incorrect handling/treating
of the machine will lead to a loss of guarantee and also any faults and damages caused
by undue force.

4. Certain parts of the machine are „consumable parts“ and are not covered by the warranty.

5. Guarantee services do not cause an extension of the guarantee time or the start of a

new guarantee time. The warranty for replaced parts ends with the guarantee time of
the whole unit.

6. We may, at our option, replace the machine rather than repair it.

7. Further claims, especially for damages, losses etc. outside the unit are excluded.

Other guarantee regulations may be valid outside the USA. Please check with your dealer!

If you should send the unit for service, do not forget to remove any liquid from the fluid
bottle.

For warranty service in North America contact:

Look Solutions USA Ltd.
1-800-426-4189
[email protected]

Summary of Contents for LMAF LOOK





















Reviews: