9
Operation Instructions
Control interface
You will find six buttons and four LED indicators on the faceplate.
The LED indicates the status of the unit.
a. Setup Mode
(before pressing RUN/Start)
LED light indicates your current parameter. If you are setting a value for Voltage, the
Voltage LED will be lit.
b. Operation Mode
After you start the experiment, the LED light next to the RUN/STOP button will light
up to indicate the unit is under operation.
1.
– Select voltage value
2.
– Select current value
3.
–
Timer
button
4.
– Increase the Voltage, Current or Time
5.
– Decrease the Voltage, Current, or Time
6.
– Start or stop the unit
Summary of Contents for FlashGel 57024
Page 2: ......
Page 18: ...16 Notes...
