Lonking CDM307, Operation Manual

Page: 68 / 81

CHAPTER IV MAINTENANCE SECTION
62
4.4.1.7 Regular maintenance should be done in daily , 50,100, 250, 500, 1000, 2000 hours.
TABLE 9
cycle Inspect content
Daily
1
．
Inspect the level of the cooling water and the anti-freezing fluid
2
．
Inspect oil sump of the diesel, engine oil surface of the speed
regulator(injection pump)
3
．
Inspect whether the leather belt is loose or not.
4
．
Inspect the starting possibility, colour of the exhaust and abnormal
noise.
5
．
Inspect the braking capacity.
6
．
Inspect the flexibility of the direction.
7
．
Inspect the leakage of the oil and water in every system.
8
．
Inspect and monitor the working condition of the instrument.
9
．
Inspect the whether there is abnormal noise and overheating or not.
10
．
Inspect the air pressure, cracking or not, or abnormal wear
11
．
Inspect the working condition of the switch, the pedal, the handle and
the button.
12
．
Inspect whether bolts and nuts in every part are loose, fallen off or
not.
13
．
Inspect whether the wheel nuts, hub assembly bolts are loose or not.
14
．
Inspect the flexibility of control lever system, fill the lubricating grease.
15
．
Fill the lubricating grease to every articulating point and pin shaft
sleeve.
16
．
Inspect the safety belt.
17
．
Inspect the separator for the water and sediments.
EVERY 50 HOURS
Besides the daily life maintenance of the machine, follow work needs to
do.
1
．
Clean the filter of the diesel engine, replace the diesel oil paper filter
core.
2
．
Clean the air filter core, replace it if necessary.
3
．
Inspect whether the binding bolt of engine support is loose or not.
4
．
Inspect the working device, frame and cosmetic parts.
5
．
Inspect the level of the hydraulic oil , fill it if necessary.
6
．
Clean the contaminant on the surface of the radiator and cooler.
EVERY 100 HOURS
Besides the 50 hours maintenance for the machine, follow work needs to
do.
1
．
Replace the diesel engine oil, engine oil filter (replace at the first time).
2
．
Clean the terminal end of the battery.
3
．
Inspect the piston rod of the oil cylinder.
EVERY 250 HOURS
Besides the 100 hours maintenance for the machine, follow work needs to
do.
1
．
Replace the anti-freezing fluid.
2
．
Replace the diesel engine oil, engine oil filter.
3
．
Inspect the tension of the chain, tight the chain if necessary.