Setting up your Lomond printer
Page 25 of 106
Always lift the printhead latch as far as possible. It should be vertical when fully opened.
6.
Remove the fluidic cap protectors from the two fluidic couplings.
7.
Open the end of the printhead package outer box and slide out the foil bag.
8.
Inspect the integrity of the foil vacuum sealing. The foil bag should be formed tightly to
the contours of the printhead cartridge as shown above. If the foil is loose to any degree
then the seal has been compromised.
If a poor seal is suspected, DO NOT USE the printhead cartridge. Report the issue to your
supplier.
9.
Carefully rip the foil packaging open at the notch. Use scissors if your foil bag does not
have a notch or if you are finding it difficult to tear the bag.
