9
trouBlEshooting
Q:
The LomoGraflok is functioning but the film does not eject after
the Film Ejection Button
[2]
is pressed.
A:
Please check the following:
• Make sure that there is film installed in the camera.
• Check the Film Counter Window
[8]
to see if your film has
come to an end.
• Make sure the LomoGraflok is not set to “Off”.
• Check the battery power by checking the battery light inside
the Film Counter Window
[8]
. If it is not lit up, that means
your camera is running out of battery. You should insert fresh
batteries.
Q:
I focused on the ground glass well but the photo is out of focus.
A:
Make sure the Film Plane Calibration & Mask Attachment
[13]
is
installed correctly while focusing and the LomoGraflok is
installed correctly on the camera while shooting.
Summary of Contents for LomoGraflok 4x5 Instant Back
