Lombardini LDW 502, Service Manual

Page: 85 / 98

- 85 -
service manual
mod. 051135
8
A
9 - Install the cooling fan.
10 - Tighten the screws to a torque of 10 Nm.
Important
Replacement may be carried out with the engine
installed on the machine.
1 - Switch off the engine and leave to cool.
2 - Disassemble the cooling fan belt drive (see “Removing
the cooling fan belt drive”).
3 - Disassemble the timing belt drive (see “Removing the
timing belt drive”).
Important
Replacement may be carried out with the
engine installed on the machine.
1 - Switch off the engine and leave to cool.
2 - Prepare a receptacle to catch leaks.
3 - Remove the filter (A) using the special tool.
4 - Lubricate the new filter seal with engine oil.
5 - Install and tighten the filter manually.
Important
Polluting substances should be disposed of
properly, in full compliance with the law.
8.3 REPLACING THE TIMING BELT
4 - Replace the timing belt with an original spare (see
“Assembling the timing belt drive”).
5 - Check the timing belt rating (see “Checking timing belt
rating”).
6 - Mount the belt drive cover (see “Assembling the belt
drive cover”).
7 - Replace the cooling fan belt drive (see “Installation of
the cooling fan belt drive”).
8.4 REPLACING THE OIL FILTER
cooling fan
flange
fan hub pulley
REPLACING PARTS