18
THIS MANUAL IS PROPRIETY OF
ECOWIND by LOMBARDINI
- ALL FORMS OF REPRODUCTION, PARTIAL OR OTHERWISE, IS STRICTLY PROHIBITED
G
B
Fig. 6
Fig. 7
H = 300 mm (min)
GROUND
S
F
Frame Truck
F
Frame Truck
S
25 mm min
25 mm
min
F1_F2 - n° 4 hole Ø 15 mm
STEP 2
STEP 1
ASSEMBLY AND INSTALLATION
- 3
3.4
MOUNTING DIRECTLY TO THE SIDE FRAME
After mounting on bench the power unit frame
S
, attach the vertical bracket
V
at the vehicle frame
F
as reported on fig. 6.
WARNING
We advice to install the frame power unit S with a deep H not less at 300 mm for more safety against the conformation
of kind of floor.
After the operation to position the frames
S
regarding
F
, to drill four holes of 15 mm diameter as showed in fig. 7
WARNING
For a correct installation of frame S, we recommended to drill at measurements as indicate in fig. 7.
Summary of Contents for ECOWIND 350 C AUS
Page 2: ......
