LOHBERGER LCP 70 User Manual Download Page 3

page 3

With this solid fuel-fired stove you have selected a high-quality product made 
by LOHBERGER. Apart from the beautiful and timeless design we attach great 
importance to a fully developed combustion technique, high-quality materials 
as well as perfect workmanship. Correct handling and proper care are a prereq-
uisite for high reliability and a long service life. Therefore please read the infor-
mation in this user manual carefully. With the above in mind, we are convinced 
that this appliance will give satisfactory service for many years.

Your LOHBERGER Heiz + Kochgeräte Technologie GmbH

When installing and starting-up the stove, observe the regulations 
and provisions of the building authorities and fire police applicable 
at the place of installation as well as the following standards /
instructions:

ÖNORM M7550

Central heating boiler up to 100 °C: definition, requirements, tests, 

marking of conformity

ÖNORM M7510/1

Instructions for inspection of central heating systems

ÖNORM M7510/2

Instructions for inspection of central heating systems; standard 
values. 

ÖNORM B8130

Safety devices

ÖNORM B8131

Closed water heating systems; safety requirements

ÖNORM B8133

Safety requirements water heating systems

DIN 4751 Part 1

Safety equipment for heating systems with supply temperatures up 

to 110 °C (120 °C in planning stage)

DIN 4751 Part 2

Safety equipment for heating systems with supply temperatures 

up to 110 °C (120 °C in planning stage); open and closed water 

heating systems up to 349 kW (300000 kcal/h) with thermostatic 
safety device

DIN 4751 Part 4

Safety equipment for heating systems with supply temperatures up 

to 120 °C; closed water heating system with static heights exceed

-

ing 15 m or rated heating output over 350kW. 

DIN 1988

Drinking water supply systems on building sites 

 

(technical regulations).

ÖNORM EN 303-5

Boiler for solid fuels, charged manually or automatically up to 300 
kW. Definitions, requirements, tests and marking of conformity

ÖNORM M7135

Densified wood made of untreated wood or bark – wood pellets 

or briquettes 

ÖNORM M7136

Densified  wood  made  of  untreated  wood  –  wood  pellets  – 

 

quality assurance regarding transport and storage logistics 

ÖNORM M7137

Densified  wood  made  of  untreated  wood  –  wood  pellets  – 

 

Requirements regarding the owner’s pellets storage room 

TRVB H118

Technical specifications regarding preventive fire protection for au-
tomatic heating systems with wood;

Summary of Contents for LCP 70





























Reviews: