LOHBERGER LCP 70 User Manual Download Page 27

page 27

AUSTRIA

 (Head office)

LOHBERGER Heiz u. Kochgeräte Technologie GmbH
Landstraße 19
5231 Schalchen
Telefon: 07742/ 5211-199
Telefax: 07742/ 58765-199
E-mail: [email protected]

Duration of the Warranty

In principle, LOHBERGER grants a 3-year full warranty on verifiable 
material or factory defects on every appliance. Warranty expires in 
any case after five years following the manufacture of the appliance. 
Certain restrictions apply to some models and parts: for appliances 
with central heating insert the warranty depends either on the ex-
pert installation of a return elevation or the installation of a valve 
cabinet (AME.4).

Exceptions

Exceptions are only parts subject to wear such as fireclay, which is 
normal for an appliance used for heating. Possibly occurring chang-
es in colour or expansion cracks in the fireclay are dependent on 
the material and can never be completely ruled out. However, they 
do not impair the functioning of the appliance as long as the fireclay 
remains in the firebox.

Glass panes

 (breakage of glass because of external hazard, changes 

on the surface due to thermal influences such as sintered fly-ash or 
soot at the surface of the viewing window).

Discolouring

 of paint due to overload or thermal strain.

Seals (e.g. hardening or breakage due to thermal or mechanical 
strain)

Surface coatings

 (frequent cleaning or cleaning with abrasive clean-

ing agents)

Castings

 which are subject to high thermal stress such as the JET-

FIRE flame bundling plate and grate.

Pellets conveyor device

, damper grate, ignition device, flame tem-

perature sensor from the LOHBERGER pellets module. 

Start of warranty

The start of warranty is the time the appliance is handed over.
Please keep this user manual as well as the warranty card with
the invoice in a safe place at all times. A prerequisite of our
warranty obligation is that the appliance has been installed
and connected according to our instructions and the applicable
EN/DIN /Austrian standards and has been operated and
expertly maintained according to our instructions.

Repairs

We will carefully check your appliance and establish whether
the warranty claim is justified. If yes, we will decide in which
way the defect should be repaired. In the event of a repair we
ensure expert performance on location or in our works. This
does not affect the start of warranty determined by the handover;
if it is necessary to replace the appliance, the warranty
period starts anew. If you send in your appliance for repair
please enclose your warranty certificate and proof of purchase.

Costs

LOHBERGER accepts all costs for the duration of the warranty. 
Should we decide that your appliance is best repaired in our works, 
you will be responsible for the transport costs and the transport.

Liability exclusion

We cannot accept any liability for the loss or the damage of
an appliance through theft, fire, vandalism or similar causes.
Indirect or direct damages caused by a supplied appliance or
resulting upon the delivery of an appliance are excluded from
the liability unless the delivery was performed by LOHBERGER
or by a transport company commissioned by LOHBERGER.
We cannot accept any liability for damages caused by chemical
or electrochemical effects (e.g. pollutants in the combustion

air, condition of heating water not VDI-compliant – e.g.: “lime

deposit”, etc.) or as a result of installation not corresponding
to the rules of engineering or the LOHBERGER documentation.
We will accept liability for visible paint and enamel damages
due to manufacturing defects only if such defects are brought
to our attention in writing within 14 days following the handover
of the appliance.

Changes to or intervention in the appliance through persons not 
authorised by us to do so will invalidate our warranty obligation.

Setting up and conversion work are subject to billing.

34. After-sales service /Ordering spare parts

34. After-sales service /Ordering spare parts

35. The LOHBERGER WARRANTY

35. The LOHBERGER WARRANTY

So that our Customer Service can prepare repairs and spare parts deliveries thoroughly, we require the following information when you 
request services from us:

Please note:

 

Your exact address

 

Your telephone and fax number or e-mail address (if available)

 

The exact appliance designation (see nameplate)

 

When can our Customer Service call on you?

 

The purchase date

 

An exact description of the problem or the type of service you are requesting

 

Please have your bill ready at hand

In this way you help us to save time and money and also to serve you more 
efficiently.

Summary of Contents for LCP 70





























Reviews: