LOHBERGER LCP 70 User Manual Download Page 13

--   Main menu    --

>Settings <

 information 

 Factory level

--   Main menu    --

>Settings <

 information 

 Default setting

-- Settings   --

>time/Date <         |

 automatic mode      |

 Heating period      |%

--   Settings   --

>time/Date  <        |

 automatic mode      |

 Heating period      |%

--  time/Date  --

>clock time   13:46 <

 Date 04/09/2009

--  time/date  --

 time         13:46

>Date 04/09/2009 <

page 13

Key lock

To switch on the key lock, press the buttons  

 and  

  at the same time.

To switch off the key lock, press the buttons  

 and 

  at the same time.

The key lock prevents an accidental adjustment of the appliance settings (e.g. 
when cleaning the control panel, caused by children, …) and can be switched on 
or off if required

The key lock prevents an accidental adjustment of the appliance settings (e.g. 
when cleaning the control panel, caused by children, …) and can be switched on 
or off if required

The key lock function is switched off when the appliance is delivered and can be 
activated in the menu Settings --> See point Key lock (function) 

The key lock function is switched off when the appliance is delivered and can be 
activated in the menu Settings --> See point Key lock (function) 

If the key lock is activated, it is still active after a possible power failure.

If the key lock is activated, it is still active after a possible power failure.

18. Main menu

18. Main menu

To enter the main menu from the top level of the menu, press the >OK< button 
once.

Settings

   To perform appliance settings

information

   

Display /Information on the appliance and its components

Default setting

    Detailed settings (service technician)

17. Menu Settings

17. Menu Settings

To get to the menu Settings from the 

main menu

, select the menu 

SETTINGS

 

with 

 

 

or

  

 

and press the >

OK<

 button once.

Time /Date:

 

To set clock time and date

Automatic mode:

  To change between manual operation and operation with ad-

justable heating times.

Heating period:

 

Adjustment level for heating times 

Key lock:

 

To switch the key lock on/off 

Servicecode:

 

To reset the cleaning /maintenance interval by the service tech-
nician

Reset:

 

To reset all settings made by the customer.
For central heating appliances.

For central heating appliances:

Summer/Winter:

 

To change from summer to winter mode

Time/Date 

Select the menu Time/Date in the menu 

Settings

 with

 

 

or

 

 and press the 

OK button once (figure 22). Select sub-menu 

clock time by

 pressing the but-

tons  

 

 

or

 

  

(figure 23). 

Press

OK

button once, the display 

Hour

 flashes

Adjust accordingly by pressing the buttons  

 

 

or

 

 

 

Press

OK

button once, the set value is stored, the display 

Minute

 flashest

Adjust accordingly by pressing the buttons 

 or 

.

Press OK button once, the set value is stored, the display 

day

 flashes

Adjust by pressing the buttons 

 or 

Press OK button once, the set value is stored

Select sub-menu 

date

 by pressing the buttons 

 or 

 (figure 24)

Press OK button once, the display Day flashes

fig. 20

fig. 21

fig. 22

fig. 23

fig. 24

fig. 25

Summary of Contents for LCP 70





























Reviews: