16
2
3
4
5
10
11
4 x
4 x
4 x
12
13
14
15
Fit the first rail sections to the rail frame. Note that
the short sections should be used at the ends of the
rail frame. The first short section is to be the inner
rail section, and the first long section should be
installed on the outside of it. The rail sections should
overlap each other. Tighten the bolt joints fingertight
before the final adjustmen of the rails.
Repeat this process on each corner.
The rail sections should be fitted so that they overlap
each other. They are then secured with the bolt joints
in every rail attachment hole in the rail frame as shown
in the illustration. Then, repeat the installation on the
other side of the rail frame. The last short rail section
should be fitted the same way as the first one. See step
10 above.
