Logos LUNA-FL User Manual Download Page 12

Page: 12 / 122

www.logosbio.com

1.2 Product Contents

The LUNA-

FL™ Automated Fluorescence Cell Counter (Cat # L20001) includes the following

components.

Component

Quantity

LUNA-

FL™ Automated Fluorescence Cell Counter

1 unit

Power cord (including an adapter)

1 unit

PhotonSlide™

1 box of 50 slides

Acridine Orange/Propidium Iodide Stain

2 x 0.5 mL

Trypan Blue Stain, 0.4%

2 x 1 mL

LUNA™ Fluorescence Calibration Beads

0.5 x 1 mL

USB Drive, 16 GB

1 unit

Note

: The PhotonSlide™ is a counting slide developed by Logos Biosystems that provides much better

fluorescence signal, with ultra-low autofluorescencence. Users of the LUNA-

FL™ are recommended to

use the Photon

Slide™, especially for the yeast counting and GFP transfection assay.

Note

: When you receive the product package, please check that all the components listed above are

included and that no damage has occurred during transit. The warranty does not cover damage that

may occur during the shipping and handling process. Any damage claims must be filed with the carrier.

Summary of Contents for LUNA-FL



























































































































Search results

Summary of Contents for LUNA-FL

Reviews:

Related manuals for LUNA-FL

Brands by name

Popular brands

Logos LUNA-FL, User Manual

Search results

Summary of Contents for LUNA-FL

Reviews:

Related manuals for LUNA-FL

Brands by name

Popular brands