17
Using other programs as well as CELENA® X Explorer at the same time can affect both
imaging and analysis time. Using only CELENA® X Explorer is recommended when imaging
and acquisition.
Install filter cubes and objectives
CELENA® X Explorer must be on to install filter cubes and objectives.
For detailed instructions on how to install filter cubes, go to 5.2 Change filter cubes.
For detailed instructions on how to install objectives, go to 5.3 Change objectives.
Make sure the installed filter cubes and objectives match what is set in the CHANNELS panel.
Shut down the CELENA® X
Explorer must be shut down before the device to allow the stages to dock for safety.
Turn off in this order:
Close CELENA® X Explorer by clicking
ⅹ
button on the top right corner of
Explorer.
Turn off CELENA® X main unit by pressing the power button for 3-5 seconds.
Turn off CELENA® X controller by pressing the power button.
