40
Insert the desired LED filter cube, fasten the screw, and plug in its connector.
Repeat as necessary.
Click Finish when complete. This will return you to the original filter cubes settings window.
①
Select the installed filter cube from the registered filter cubes list.
②
Select the post in which it was installed from the installed filter cubes list and click >>.
③
Double-click the label box to change how it shows up in the CHANNELS panel.
④
Use the Color drop-down menu to assign the filter cube a pseudocolor.
⑤
Use the DEL,
▲
,
and
▼
buttons to edit the list of installed filter cubes as needed.
⑥
Click Apply.
5.3 Change objectives
Use only objectives compatible with CELENA® X specified in Compatible objectives. If you
use an objective not compatible with CELENA® X the performance and the safety cannot be
guaranteed.
Procedure
Go to Settings > Objectives.
Select Change objectives.
1
2
3
4
5
6