36
STORING POWER POSITIONS IN MEMORY
!
WARNING
When selecting a position stored in memory, all actuators are in
motion to activate the desired power seating position. Ensure that
hands, any body parts and clothing are clear from any moving
parts.
Speed up
Speed down
1. USING THE SPEED BUTTONS ON THE JOYSTICK
a) Set the seating in the desired position, then stop all seating
movements. If the seating is moving it will not be possible to
store the position.
b) With the joystick, select seating mode and toggle right until
the screen shows M1/M2 or M3/M4.
c) Push the speed down button for 3 seconds, you will hear a
short beep.
Release the speed down button. Within the next 3 seconds,
perform step d) or e).
d) To store the position under the forward direction (M1/M3),
hold the speed up button for 3 seconds, you will hear a short
beep, then release. Your position is stored*.
e) To store the position under the backward direction (M2/
M4), hold the speed down button for 3 seconds, you will
hear a short beep, then release. Your position is stored*.
NOTE
- * If it is not possible to store the position or the
processed failed, 3 short beeps will be heard. Try again.
2. USING THE KEYPAD
a) Set the seating in the desired position, then stop all seating
movements. If the seating is moving it will not be possible to
store the position.
b) Push and hold the 2 most left top toggle switches/buttons
on the keypad, after 3 seconds, when the green LED starts
fl ashing slowly, release both switches/buttons.
c) Push and hold the 2 most left bottom toggle switches/buttons
on the keypad, after 3 seconds, when the green LED starts
fl ashing fast, release both switches/buttons.
d) To select the memory seating location on the keypad, toggle
down one of the switches or push one of the bottom buttons
for 3 seconds. If the position is stored successfully, the green
LED will remain on.
NOTE
- If it is not possible to store the position or the
processed failed, the red LED will fl ash for 3 seconds.
Try again.
3. 4 OR 5 PUSH BUTTONS
NOTE
– The power seating options are assigned at the factory
according to the wheelchair confi guration and depending on
the options selected.
To activate a power option, push the assigned button and
hold until the desired position is achieved and release.
Pushing the same button a second time, will activate the
power option in the opposite direction toward the neutral
position.
Summary of Contents for ALLTRACK M3 Series
Page 47: ...47 ...
