LOGO SILVER ALLTRACK M3 Series, Owner'S Manual, Page: 34 / 48

34
3. DUAL PUSH BUTTON
To activate the power option (A), push the button, located
furthest from the wire, hold until the desired position is
achieved and release. To return toward the neutral position,
push the other button (B).
MULTIPLE POWER ACTIVATION
The following devices are designed to activate more than
one power seating options described previously, such as tilt,
elevate, recline, elevating & articulating legrests and elevating
& articulating center mount. Activation devices are located next
to the joystick. For the purpose of consistency, let’s assume the
wheelchair is in its neutral position to start.
1. TOGGLE KEYPAD AND BUTTON KEYPAD
Activating power options (A) on these devices depends on
whether they are equipped with the feature of storing power
seating positions in memory (B) or not.
• ACTIVATION FOR KEYPADS
WITHOUT STORED MEMORY:
NOTE – Direction of toggle switch operation or choice of top/
bottom push buttons are factory-programmed, and they
FOLLOW THE MOVEMENT OF THE BODY.
To activate a power option, use the toggle switch or push
one button under the corresponding power option, hold until
the desired position is achieved, then release. Refer to the
pictogram legend on the next page. To return toward the
neutral position, toggle in the opposite direction or push the
other button.
• ACTIVATION FOR KEYPADS
WITH STORED MEMORY:
To activate the power option, always toggle forward (A)
or push upper button under the corresponding power
option, hold until the desired position is achieved, then
release. To return toward the neutral position, toggle forward
or push upper button
a second time .
To activate the memory positions stored, toggle backward (B)
or use lower buttons on the keypad.
NOTE – The memory-stored positions are personalised
depending on what the user has selected. Memory positions
do not necessarily correspond to the pictograms shown
above the toggle switch or push button.
POWER SEATING ACTIVATION
SINGLE POWER ACTIVATION
The following devices are designed to activate one of the power
seating options described previously, such as tilt, elevate, recline,
combined legrests and center mount. Activation devices are
located next to the joystick.
For the purpose of consistency,
let’s assume the wheelchair is in its neutral position to
start
.
1. SINGLE TOGGLE SWITCH
To activate the power option, toggle backward and hold
until the desired position is achieved, then release. To return
toward the neutral position, toggle forward.
2. SINGLE PUSH BUTTON
To activate the power option, push the button once and hold
until the desired position is achieved, then release. To return
toward the neutral position, push the button a second time.
A
B