24
DUAL POST HEIGHT ADJUSTABLE ARMREST
(Fig.3)
The dual post flip-back armrest can be used as either a flip-back
armrest or a removable armrest.
1. INSTALLING ARMREST
a) Insert front and rear posts (A) into armrest receivers.
b) Engage lever (B) and insert the rear safety pin (C).
2. SET-UP FOR FLIP-BACK OPERATION
a) Disengage lever (B) to free front post (A).
b) Armrest now has the ability to be flipped
back without removal.
3. SET-UP FOR REMOVAL
a) Disengage levers (B) and pull out the rear safety pin (C)
to free both front and rear posts (A).
b) Armrest can now be easily removed for transferring.
4. HEIGHT ADJUSTMENT
a) Release the upper securing lever (D).
b) Set at desired height.
c) Return securing lever to locked position.
d) Move armrest up or down to allow armrest
to snap into place.
Fig.3
B
C
D
A
CANTILEVER AND RECLINING
ARMREST ADJUSTMENT
(Fig.4-5)
Both the cantilever and reclining armrests can be flipped-back,
are height adjustable, but they are not removable.
1. CANTILEVER ARMREST ADJUSTMENT
(FIG.4)
a) To adjust, remove the two bolts (E) behind the armrest
with 2
7
/
16
" wrench.
b) Reposition in the available holes for desired height.
c) Retighten bolts (E) on each side.
2. RECLINING ARMREST ADJUSTMENT ON SEAT
FRAME
(FIG.5)
a) To adjust, loosen screws (F) on the collar behind the
armrest with a
3
/
16
" Allen key and bolt (G) from the
vertical tube.
b) Reposition to the desired height.
c) Tighten screws (F) on the collar behind the armrest,
and install and tighten bolt (G) on the vertical tube.
d) To release the armrest, press the release lever (H)
towards the inside of the wheelchair, then lift.
!
WARNING
Reinstall bolts and tighten them securely.
Fig.4
E
Fig.5
F
G
H
Summary of Contents for ALLTRACK M3 Series
Page 47: ...47 ...
