manualshive.com logo in svg

LogIT Voyager SX, Quick Start Manual

Share
Download
LogIT Voyager SX Quick Start Manual Download Page 45

43

Method:

 

1. Switch on Voyager by pressing any button.

 

2. Start Voyager logging by pressing the 

✔

 button. 

 

3. Sample for the length of the school day.  (24 hours is recommended if a suitable place for the Voyager can be found)

 

4. Press the 

✘

 button to stop logging.

 

5. Upload the results to a computer and view the graph.

Results:

 

What do the results show?

 

Are the results a surprise?

 

What happened to the temperature as the light increased?  Why was this?

 

Do your results suggest a depth where the temperature remains fairly constant?

 

Why is soil temperature such an important issue in plant growth?

Going further:

 

Log soil temperature data for a year and compare the seasons.

 

How might you show heat fl owing through the soil using three temperature sensors?

 

How is soil temperature used in heat pumps that heat houses?

 

What environmental impact does soil temperature have on the earth and its  systems?

 

What other factors could you investigate to form a study of your local climate? 

 

Biology

Summary of Contents for Voyager SX

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands