manualshive.com logo in svg

LogIT Voyager SX, Quick Start Manual

Share
Download
LogIT Voyager SX Quick Start Manual Download Page 37

35

Method:

 

1. Switch on the datalogger by pressing any button.

 

2. Start the datalogger logging by pressing the 

✔

 button.  

 

3. Leave the datalogger to log for a chosen length of time - at least 24 hours.

 

4. After the time period stop logging by pressing 

✘

 or stopping the datalogging software if connected to a computer.

 

5. Upload the results to a computer and view the graph.

 

Hint: The best location for the datalogger is outside away from the effects of wind and damp.  The datalogger should also be 90

o

 to  

 

the path of the sun.

Results:

 

Did the temperature change?

 

Did the light level change?

 

Did the changes take place at the same time.

 

Was it a cloudy day - how can you tell when a cloud passed?

Going further:

 

Try the experiment on different days in the week.

 

Try the experiment at different times of the year e.g. Autumn, Spring,

 

Summer and Winter.

 

How does the location of your country affect the results - think 

 

about positions above or below the Equator.

Biology

Summary of Contents for Voyager SX

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands