Bef
or
e U
se
Cleaning
and M
ain
tenanc
e
Specifica
tion
Oper
ation
Saf
et
y
W
ar
nings
GB-12
Setting the Delay Timer
The time delay function allows you to delay the start time of baking by up to 12 hours, depending on the
length of the baking cycle.
For example: It is 8:00p.m. and you want to have fresh bread (using the Basic setting) at 7:00a.m.
The the difference between now (8:00p.m.) and 7:00a.m. is 11 hours. Connect the breadmaker to the mains
socket. The preset cycle of 3:00 hours will be displayed.
Steps
Display / Button
Set the display time to 11:00 (The time difference between now and
when you want the bread).
Press to add time in 10 minutes steps.
Press to deduct time in 10 minutes steps.
Press the START/STOP button to start time delayed baking.
If you keep the TIME+ or TIME- buttons pressed, they will cycle to a maximum of 13:00 hours and reset to the
preset programme time (in this case 3:00 hours).
The timer display shows the total time left (in hours and minutes) until the bread is finished (including the
delay added and the programme time). It does not display the 1 hour KEEP WARM time after the programme is
finished.
Remember to press the START/STOP button to commence the timer countdown - otherwise nothing will
happen. If you set the timer incorrectly after the START/STOP button has been pressed, you are able to switch
off and reset the delay period again only if mixing has not started.
Memory Recall
If the mains supply is temporarily interrupted, the process of bread making will continue automatically
when power is restored. However, if the interruption exceeds 15 minutes, the breadmaker must be restarted
manually. If the process has gone no further than the kneading phase when the mains supply is cut off, you
may press the START/STOP button to resume the programme from the beginning.
Bread Recipes
To get your started with your breadmaker, here is a selection of recipes. The recipes use fast action or easy bake
dried yeast.
When adding ingredients add the water first, followed by any other liquid and semi-liquid ingredients. Next
add the flour followed by the other dry ingredients. Tap the pan lightly on all sides to settle the flour. This
prevents the yeast from coming into contact with the liquids. Finally add the yeast in a small heap in the centre
of the pan.
The recipe quantities are sufficient to bake a 700g loaf. Scale them up for larger loaves.
Summary of Contents for L90BMS10
Page 1: ...Stainless Steel Breadmaker Instruction Manual L90BMS10 ...
Page 2: ......
Page 23: ......