Logik L26DVDB11, Instruction Manual

Page: 18 / 72

18
GB
Initial
S
etup
6.. Channel tuning will commence. This operation may take up to 6
minutes. The display will show the progress of the tuning and the
number of channels found.
7.. If you want to skip the ATV tuning, press the MENU button to
interrupt the tuning half way. A pop-up screen will be displayed,
press the button to select
YES to confirm. You will then go
straight to DTV tuning. You may repeat the above step if you also
want to skip the DTV tuning. An installation reminder will appear
the next time you turn on the TV.
8.. After tuning is complete, the channels are arranged in the
broadcaster's preset order. If you wish to skip channels, modify
the preset order or rename channels, select
Channel.Edit under
the
Channel
menu (refer to page 22-23 for details).
Channel Tuning
TV : 0 Channel
DTV : 0 Channel
Radio : 0 Channel
Data : 0 Channel
1 %... 471.25 MHz (TV)
Please press MENU key to skip
5.. Press the buttons to navigate the menu and change the
settings. Press the
OK
button to confirm.
OSD.Language Select your desired language to be displayed on
the menu. The default on-screen menu language
is set as English.
Country Select the country where you will operate the TV.
The default country is set as UK.
.Turning.the.TV.on.for.the.First.Time
1..
Connect the mains cable to the mains socket after you have
completed all the connections.
2..
Switch on the
POWER.ON/OFF
switch which is
located at the rear left lower side of the TV. At this
stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
3.. In standby mode, press the . /.I button at the
front right side of the TV or the
.
button on the
remote control to turn the TV on. The red LED
indicator will turn blue.
4.. The first time you turn the TV on, it will go straight into the First.
Time.Installation
menu. Please ensure the aerial is plugged
in and then press the OK button. (If you have already installed
the TV using the Quick Start Guide, please go to the next step
“
Selecting.the.Input.Source ” on the next page.)
Please ensure aerial is plugged in!!
Then press OK button to start
Please select an OSD Language
Deutsch
Español Français
Português Italiano
English
Country
France
Germany Portugal
Italy Spain
UK
Menu
Always disconnect the TV from the mains socket when
not in use for a long period of time.
The
. /.I button at the front right side of the TV or
the
.
button on the remote control is only used for
switching the TV into standby, it does not disconnect
the TV from the mains power. To completely disconnect
the mains power, please remove the mains plug from
the mains socket or switch off the
POWER.ON/OFF
switch.
Initial.Setup
To the mains socket
L26DVDB11_IB_110414_Annie.indd 18 11年4月14日 下午5:46