Logik L14VUR12, Instruction Manual

Page: 9 / 20

1. Press the handle release button until you hear a
click. Then lift the handle to an upright position, the
handle will lock automatically.
2. To lower the handle, press the handle release button,
and push down gently but firmly.
Getting Started
Handle Release
Using the Mains Cable Holders
1. To quick release the mains cable, simply rotate the upper mains cable holder to unwrap
the mains cable. Hang the unwrapped mains cable on the mains cable before using the
vacuum cleaner.
Mains Cable
Holder
Mains Cable
Hook
2. To store the mains cable, make sure the upper mains cable holder is in an upright
position. Wrap the mains cable into place by wrapping in a clockwise direction around at
the lower mains cable holder first. Don’t over tighten the mains cable as this may damage
the mains cable.
Handle
Release
Button
Before getting started, you may need to
insert the handle into the main unit. Push
down firmly until handle locks into place.
9
L14VUR12_IB_130614_chris.indd 9 14/6/13 6:08 PM