Logik L14VUR12, Instruction Manual

Page: 16 / 20

Cleaning and Changing the Belt
Should the drive belt become worn or it slips, you can replace the drive belt.
1. Switch Off the vacuum cleaner and unplug from the mains socket.
2. Make sure the vacuum cleaner is locked in its upright position.
3. Carefully lie the vacuum cleaner down and remove the 6 fixing screws. Ensure you keep
all the screws in a safe place.
Drive Belt
Rolling
Rod
Roller Brush
Only use the right belt. Using another belt could create a hazard and would
invalidate the warranty.
4. Take off the cover of the power head starting from the back of the power head.
5. Remove the roller brush lifting it firmly upwards to release it.
6. Slide out the belt from the rolling rod.
7. Replace the worn out drive belt with a new one (not included). Place the new belt drive
onto the rolling rod. Carefully stretch the new belt over the roller brush and ensure it is
correctly fitted before reinserting the roller brush.
8. Refit the cover and secure with the 6 fixing screws.
Fixing Screws
Fixing Screws
16
L14VUR12_IB_130614_chris.indd 16 14/6/13 6:08 PM