Logik L14VUR12, Instruction Manual

Page: 14 / 20

4. Remove the Motor Protection filter and clean in
warm soapy water. Ensure the filter is totally dry
before re-assembly.
Changing and Cleaning the Motor Protection Filter
• Never use the vacuum cleaner without the motor filter protection and exhaust
filter installed, otherwise damage to the vacuum cleaner may occur.
• Failure to keep the filters clean, will result in a loss of performance.
Inserting wet filters into the vacuum cleaner will create an electrical hazard.
1. Unplug the vacuum cleaner from the mains socket.
2. Press the dust tank assembly release.
Motor
Protection
Filter
5. Reinsert the filter and dust tank.
3. Pull the dust tank out of the vacuum cleaner.
Dust Tank
Assembly
Release
14
L14VUR12_IB_130614_chris.indd 14 14/6/13 6:08 PM