DRIVE ENCRYPTION & DECRYPTION
Logicube Talon Ultimate™ User’s Manual
83
7.1 Encrypting a Destination
To encrypt a Destination, the Encryption settings must be set and the drive will need to be
formatted using the Talon Ultimate. These steps must be performed prior to an Imaging
operation.
7.1.1 Step-by-step Instructions
1.
Select
System Settings
from the types of operation on the left side.
2.
Tap the
Encryption Settings
tab.
3.
Set the
Cipher Mode
,
Cipher
,
IV Generation
,
and Password
.
4.
Select
Wipe
from the types of operation on the left side.
5.
Tap the
Destination
icon and select the Destination drive to be
formatted and encrypted.
6.
Tap the
Settings
icon.
If the Destination needs to be wiped, choose the type of
wipe to be performed (Secure Erase and/or Wipe
Patterns). If Wipe Patterns is selected, choose the type of
Wipe Pattern to perform (DoD or Custom).
If the drive has an HPA or DCO area that needs to be
wiped, tap the
HPA/DCO
icon and select
Yes
to wipe the
HPA or DCO area of the drive.
If a Wipe Pattern was selected, tap the
Passes
icon to edit
the number of passes and what gets written on each pass.
If DoD was selected, a 7
th
pass value must be chosen.
7.
Tap the
Format
Settings
icon to change the Format setting.
a.
Set
Format
to
ON
.
b.
Select the desired
File System
(
EXT4
or
NTFS
).
c.
Set
Encryption
to
ON
. When finished, tap the
OK
icon.
