REMOTE OPERATION
Logicube Talon Ultimate™ User’s Manual
104
b.
For Windows Vista or 7, click
Start
and in the
Search
field, type
Telnet
. Telnet should appear in search results.
4.
Type
open
followed by the IP address or name of the Talon Ultimate.
For example
open 192.168.1.100
or
open Talon Ultimate-XXXXXX
where XXXXXX is the 6 digit serial number of the Talon Ultimate, then
press Enter. The Talon Ultimate login screen should appear.
Note:
On some Operating Systems, the Talon Ultimate will need to be
accessed by opening Talon Ultimate-XXXXXX.local.
5.
Login with the username “
it
” (without the quotes) and the password
“
it
” (without the quotes).
6.
A prompt should appear on the Telnet window.
7.
The Talon Ultimate can now be configured or managed via the
command line interface.
9.3.2 Connecting via SSH
Connecting to the Talon Ultimate via SSH (Secure Shell) is very similar to
connecting via Telnet. Since Windows does not have a built-in SSH client, a third
party SSH client will need to be downloaded and installed to connect via SSH.
For instructions and support on how to use third party SSH clients, please
contact the SSH client’s manufacturer.
1.
Connect the Talon Ultimate to the network by attaching a network cable
(CAT 6 type) to the RJ45 connector in the back of the Talon Ultimate.
2.
Turn the Talon Ultimate on and allow it to boot up completely.
3.
Open the SSH client and select an SSH connection.
4.
Connect to the Talon Ultimate either by IP address or by name. The
name of the Talon Ultimate will be
Talon Ultimate-
XXXXXX
where
XXXXXX is the serial number of the Talon Ultimate).
On some Operating Systems, the Talon Ultimate will need
to be accessed by opening Talon Ultimate-XXXXXX.local.
5.
Login with the username “
it
” (without the quotes) and the password
“
it
” (without the quotes).
6.
A prompt should appear in the SSH window.
7.
The Talon Ultimate can now be configured or managed via the
command line interface.
