Logicube TALON ULTIMATE, User Manual, Page: 48 / 125

IMAGING
Logicube Talon Ultimate™ User’s Manual
40
Mirror Settings :
- Length – Set the percentage or number
of blocks to clone. For forensic
purposes, this is typically set to 100% of
the Source.
- Master Start – Set the percentage or
number of blocks from the start of the
Source (Master). For forensic purposes,
this is typically set to 0%, or the
beginning of the Source (Master).
- Target Start – Set the percentage or
number of blocks from the start of the
Destination (Target). For forensic
purposes, this is typically set to 0%, or
the beginning of the Destination
(Target).
Alternatively, the specific number
of blocks can be set for each of
the options by tapping the:
(edit) icon.
4.0.3.5.2 Special Settings for Drive to File
When Drive to File mode is selected, File Image
Method Settings will appear on the top-right of
the Settings screen: