USER MANUAL SMARTneo //
PAGE 9
DANGER
Danger due to inactive collision protection
With all reset processes (Chapter 9.4 Manual reset), the collision
protection (ISP) is inactive. Please note the increased crushing
hazard hereby!
DANGER
Remove from the electricity network before cleaning
The motor control unit must be cleaned exclusively with a dry,
soft cloth. Before cleaning, you must pull the power supply cable
from the mains plug without fail.
DANGER
Cleaning by children without a supervision
Cleaning may not be carried out by children without supervisi-
on.
DANGER
Danger of crushing
There is a crushing hazard if the table top position is changed.
Therefore make sure that there are no items or persons in the
danger zone and that no one reaches into the danger zone.
WARNING
Increased safety risk
The firmware is delivered with deactivated double-click func-
tion. If you activate the function, the grading of the safety
functions according to EN ISO 13849-1 PL b, Category B, loses its
validity. The legal requirements from the standard are no longer
met with this function.
To use the double-click function, you have to carry out a new
assessment of the higher safety requirements according to EN
60335-1 which cannot be met by this product. LOGICDATA is not
liable for injuries or damage which can result from the activation
of the double-click function.
DANGER
Various dangers when exceeding the carrying capacity
Ensure that the maximum load of the table specified by the table
manufacturer is not exceeded.
DANGER
Use compatible hand control
For the HV socket, use only HSC-OV-MDF-4M2 or LOGICDA-
TA-compatible hand control cables. Especially LAN cables or
comparable cables must not be connected to the control unit.
