LOGICLINK - MANUAL // PAGE 20
7.4 CONNECTION: RETROFIT OPTION
7.4.1 REQUIRED COMPONENTS
1
LOGIClink
2
LOGIClink Retrofit Cable (LOG-CBL-LOGICLINK-CB-RETROFIT)
3
LOGIClink-compatible Control Box (Optional)
4
LOGIClink-compatible Handset (Optional)
5
Micro-USB Cable (Optional - Supplied by Reseller)
6
External Power Adapter (Optional - Supplied by Reseller)
INFO
The LOG-CBL-LOGICLINK-CB-RETROFIT Cable has 4 connectors:
• Male DIN (plugs into the Control Box)
• Female DIN (accommodates the external Handset Cable)
• 10-pin Mini-Fit (plugs into the LOGIClink)
• USB (Connects to External Power Hub)
INFO
The Micro-USB Cable is used to connect LOGIClink to your PC or Mac. It is not required
during standard operation of the table system. For further advice on software options,
contact LOGICDATA.
INFO
The External Power Adapter can be used to connect the LOGIClink to the mains in fixed
table systems (i.e. tables that are not adjustable and do not have a Control Box) and
also to connect to COMPACT-e or SMART-e Control Boxes produced before April 2017.
LOGICDATA does not supply this accessory and cannot provide guarantees regarding
quality, safety, or performance.
7.4.2 CONNECTING THE LOGICLINK
CAUTION
Risk of minor or moderate injury through electric shocks
Connecting Cables while the Control Box is connected to the Power Unit may lead to
minor or moderate injury through electric shocks.
• Do not connect the Control Box to the Power Unit before the LOGIClink has been
safely connected
1. Insert the Retrofit Cable into the LOGIClink using the 10-pin Mini-Fit connector.
2. Lay the Cable along the underside of the table top, making sure it is secured.
If you are connecting a LOGIClink-compatible Handset
3. Connect the Male DIN Cable of the Handset to the Female DIN Connector on the Retrofit Cable.
If you are connecting a COMPACT-e or SMART-e Control Box produced before April 2017
4. Connect the blue, Male DIN Cable to the Control Box, at the plug port marked "HS".
Then:
5. (Optional) connect the LOGIClink to your PC or Mac using the Micro-USB Cable.
6. Insert the USB Connector of the Retrofit Cable into the External Power Adapter.
7. Insert the Power Adapter into the Mains.
8. Connect the Control Box to the Mains. Consult the Manual for your chosen Control Box for as-
sembly and safety advice.
