LOGICLINK - MANUAL // PAGE 17
7 CONNECTING THE SYSTEM
CAUTION
Risk of minor or moderate injury through crushing
Connecting the system before the LOGIClink is properly mounted may lead to unex-
pected movement of the table system. Unexpected movements may lead to minor or
moderate injury through crushing.
• Do not connect the system before the LOGIClink has been properly mounted
• Read Chapter 6 to ensure assembly is completed correctly and safely
7.1 COMPATIBILITY
7.1.1 CONTROL BOX COMPATIBILITY
Most LOGICDATA-compatible Control Boxes have "Works with LOGIClink" on their type plate (Fig. 6)
Fig. 6:
Type Plate for a LOGIClink-compatible Control Box
NOTICE
If your Control Box does not have "Works with LOGIClink" on its type plate, you must
contact LOGICDATA before connecting the LOGIClink in order to confirm compatibili-
ty. Failure to comply is classified as misuse and will void warranty claims.
The following products are compatible with LOGIClink:
Control Boxes: COMPACT-e (after April 2017), SMART-e (after April 2017), SMARTneo, and SMARTneo-pro.
Handsets: All Handsets in the TOUCH family (with the Retrofit Cable).
The following products are not compatible with LOGIClink as standard, but can be used safely with
the Retrofit Cable:
Control Boxes: COMPACT-e (before April 2017), SMART-e (before April 2017).
Always contact LOGICDATA before connecting a Control Box that does not have "Works with
LOGIClink" on its type plate.
NOTICE
The COMPACT-e+ and SMART-e+ are not compatible with LOGIClink and must not be
connected under any circumstances. This may cause damage to the table system.
7.1.2 DYNAMIC MOTION SYSTEM
The LOGIClink is compatible with all variants of the DYNAMIC MOTION system.
