26 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
8. TROUBLESHOOTING
BEHAVIOR
The Bed Frame does not
respond when Buttons are
pressed.
Parts of the Bed Frame re-
main in an elevated posi-
tion after a power failure.
POSSIBLE CAUSE / SOLUTION
1. The Bed Frame is not connected properly. Check the power
connection
2. Time-out has been reached due to continuous operation. Do
not operate the Bed Frame for at least 6 minutes. This will re-
set the time-out.
3. Unplug the Power Converter. Wait until the LED goes out,
then plug it back in.
4. Replace the batteries in the Remote Control.
If power cannot be restored, an Emergency Lowering is required.
Proceed as follows:
1. Unplug the Power Converter from the power outlet.
2. Disconnect the Power Converter from the Cable Leading to
the Control Box.
3. Connect the Battery Strap to the Control Box Cable instead.
4. Connect two 9V batteries to the Battery Strap.
5. Use the Head DOWN/UP, Foot DOWN/UP or Sleeping Po-
sition Buttons to drive the Bed Frame to its lowest position.
Once Emergency Lowering is complete and power is restored,
you can reconnect the Power Converter. Then, perform a Ref-
erence Drive (see Chapter 5) and operate the Bed Frame as
normal.
27
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
Parts of the Bed Frame do not
move evenly.
Make sure no persons or heavy objects are on the Bed
Frame or in the range of moving parts.
The Bed Frames may be misaligned. Follow the instruc-
tions in the section “Fixing Misalignment” to realign the
Bed Frames.
NOTICE
When an Emergency Lowering is performed, only the Bed Frame connected to the Battery Strap
will be operated. You will need to perform separate Emergency Lowerings for Bed Frames con-
nected by the Sync Cable.
CODE
2 X Click
1 X Click
4-6 X Click
DEFINITION
Normal operation. Continue to operate the Bed Frame.
The system is working in emergency operation mode. Contact
Customer support.
An internal error has occured. Contact customer support.
CLICK CODES
As soon as the Bed Frame is connected to the power outlet, the Control Box uses installed re-
lays (clicks) to inform the user about system status and the reason for the last shutdown. Codes
are only transmitted during system startup. Potential click codes are as follows:
28 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
9. TECHNICAL DATA
PROPERTY
Input Voltage
Rated Input current
Suitable mattress
dimensions
Ambient conditions
Maximum load
SPECIFICATION
100-240 V
2. A
King
Cal. King
Queen
Twin XL
76 x 80 in
72 x 84 in
60 x 80 in
38 x 80 in
Indoor use only
lbs evenly distributed
10. FINAL DISPOSAL
Before disposing of the product, check the types of raw materials used in the Bed Frame and
make plans to dispose of them accordingly.
This product should not be disposed of with regular household waste. Adhere to the disposal
procedures for the raw materials and components used. Recycle as many parts as possible.
Careless or incorrect disposal may cause irreversible environmental harm. Ensure that mea-
sures are taken to protect nature, the environment, and the economy.
Dispose of all materials and parts according to local guidelines and regulations. Ensure that the
disposal is lastingly compatible for humans and nature.
NOTICE
The permitted maximum load is dependent on input voltage. At the lower end of the input volt-
age range, maximum load may be reduced. Contact LOGICDATA for further details.
