19
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 9: INSERTING THE BATTERIES
NOTICE
Replace the batteries in the Remote Control once a year. Do not use rechargeable batteries.
Insert two 1,5V AAA batteries into the Re-
mote Control and slide the cover into posi-
tion. The batteries are provided for you.
20 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
Head Platform and Foot Platform UP/DOWN Buttons
Move the Head and Foot Platforms up and down.
Sleeping Position Button
0RYHVWKH%HG)UDPHWRDÀDWSRVLWLRQ
Memory Position Buttons
Move the Bed Frame to a saved Memory Position.
5. OPERATION
REMOTE CONTROL
Each Adjustable Bed Frame is supplied with a Remote Control. Your Remote Control allows you
to operate the Bed Frame from a distance of 16 feet (5 m). The Remote Control supplied with your
product depends on the model you have ordered. Your Remote Control may include the following:
NOTE: The Remote Control supplied with your product may vary.
NOTICE
Pressing too many Buttons in a short space of time can cause damage to the system.
• :DLWRQHVHFRQGEHWZHHQSUHVVLQJGLႇHUHQW%XWWRQV
CAUTION
Risk of minor or moderate injury to children
Misuse of the Remote Control by children could lead to minor or moderate injury.
• Activate the Child Lock when children are present
• In Sync Mode, ensure the Child Lock feature is activated on both Remote Controls
• Do not allow children to play with the Remote Control
CAUTION
Risk of minor or moderate injury
Multiple Bed Frames may be in range of your Remote Control. Operating the wrong Bed
Frame may lead to minor or moderate injury.
• Ensure the Remote Control is paired to the correct Bed Frame
• Ensure the Remote Control has been safely unpaired before using it on another Bed Frame
21
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
MOVING THE BED FRAME UP AND DOWN
1. Press and hold the UP or DOWN Button for the Platform you wish to adjust
2. Wait until the Bed Frame has reached the desired position
3. Release the UP or DOWN Button
The Bed Frame will move until the Button is released or the highest / lowest position is reached.
SAVING A MEMORY POSITION
There are two pre-saved Memory Positions: Anti-Snore (Position 1) and Zero Gravity (Position
2). Press the Memory Position Buttons on the Remote Control to move to these positions. You
can change saved Memory Positions to new Memory Positions. To do this, proceed as follows:
1. Press and hold the UP or DOWN Button for the Platform you wish to adjust
2. Wait until the Bed Frame has reached the desired position
3. Release the UP or DOWN Button
4. Press and hold the Button for the new Memory Position for at least 3 seconds
WRVDYHWKHSRVLWLRQ7KH&RQWURO%R[ZLOOFOLFNWZLFHWRFRQ¿P
5. Release the Memory Position Button.
PAIRING THE REMOTE CONTROL
You must pair the Bed Frame to a Remote Control before operation. Ensure the Bed Frame has
been unplugged for at least 10 seconds, then proceed as follows:
1. Plug the Bed Frame into the mains. This will automatically switch it to Pairing Mode for 30
minutes. In this time, the Bed Frame will search for Remote Controls to be paired with.
2. During Pairing Mode, press and release any Button. This will pair the Remote Control to
the Bed Frame.
UNPAIRING THE REMOTE CONTROL
1. Press and hold the
Head UP and Foot DOWN
Buttons for at least 10 seconds.
2. 7KH5HPRWH&RQWUROZLOOÀDVKWLPHV
3. Test the Remote Control to check that it has been safely unpaired.
REFERENCE DRIVE
%HIRUHXVLQJWKH%HG)UDPHIRUWKH¿UVWWLPH\RXPXVWSHUIRUPDUHIHUHQFHGULYH:KHQWKH
GULYHLVLQLWLDWHGWKHORZHUVHFWLRQRIWKHEHGZLOOPRYH¿UVWIROORZHGE\WKHXSSHUVHFWLRQ
1. Press and hold the
Head UP/DOWN, Foot UP/DOWN
or
Sleeping Position Button. The
lower part of the Bed Frame will begin the reference drive. It will reach a lower limit and
then move up slightly. Do not release the button.
2. Continuing to hold the button, wait for the upper part of the frame to complete the drive.
3. Release the button and use the Bed Frame according to the instructions.
If the drive is interrupted, pressing any movement button restarts downward movement.
