SIMPLEX
PLUS
M A T C U T T E R
M O D E L S 7 5 0 & 7 6 0
Congratulations on your purchase of the
Logan Simplex Plus Mat Cutter. The
Simplex Plus is a well designed mat cutter
with professional features to produce
professional results. Features like
production stops, parallel mat guide in
aluminum channels and anti-crawl pin
make the Simplex Plus an efficient yet cost
effective tool for artists, photographers and
crafters alike. This instruction manual is
written to acquaint you thoroughly with this
product. Please take some time to
familiarize yourself with it before cutting.
You will find that the time taken will be
well worth it and you will be cutting quality
mats in no time.
Parts schematic available online at www.logangraphic.com
INTRODUCTION:
TABLE OF CONTENTS:
Warranty
Logan Graphic Products, Inc. (“Logan”) warrants the 750 SIMPLEX PLUS to be free from defects in parts and
workmanship for a period of two years from the date of original purchase. Logan warrants that it will either repair or
replace, in its sole discretion, any necessary replacement parts found to be defective. Should the product need to be
returned to Logan for repair or replacement parts, authorization for any return must come from Logan in writing. Costs
of returning the product to Logan, including insurances, shall be borne by the purchaser. Logan shall not be liable for
any damages or losses, incidental or consequential, direct or indirect, arising from the use of this product. This
warranty extends only to the original purchaser and is not assignable or transferable. This warranty is in lieu of all
other warranties, expressed or implied.
Introduction
1
Warranty
1
Product Description
2
Identification Of Machine Components
2
Orientation
A. Unpacking/Check of Contents
3
B. Assembly
3
C. Blade Installation
4
Operation
A. Straight Cutting a Board To Size
4
B. Cutting a Beveled Opening Using Marked Lines
5
C. Cutting a Beveled Opening Using One Production Stop
6
D. Cutting a Beveled Opening Using Two Production Stops
7
E. Cutting a Straight Opening
7
Adjustments & Maintenance
A. Blade Depth Adjustment
8
B. Re-Parallel The Mat Guide
8
C. Re-Square the Squaring Arm
8
D. Helpful Hints
9
Trouble Shooting
9
Creative Matting Guide
A. Double Mat
10
B. Off-Set Corner Mat
10
C. Inlay Mat
10
L o g a n G r a p h i c P r o d u c t s I n c . , 1 1 0 0 B r o w n S t r e e t , Wa u c o n d a , I L 6 0 0 8 4 To l l F r e e 1 8 0 0 3 3 1 6 2 3 2 w w w. l o g a n g r a p h i c . c o m
1
