P:\Public\Spec Sheets\MAUI Gas Fire Indtructions.pdf
46
GAS TROUBLE SHOOTING GUIDE
In order for the pilot to light, there must be sufficient spark at the pilot hood. To
check this, do the following:
1
Make sure the Piezo igniter is securely grounded. (It grounds to the cabinet by
contact.) Tighten if needed.
2
Make sure the electrode wire is connected.
3
Make sure electrode wire connections are not close to any metal. (Spark can
jump from wire to the metal.)
4
Check the gap at the electrode tip to the canopy (1/8” approx.) – adjust if
needed.
5
Inspect ceramic around electrode for cracks. If cracks are present igniter will
not work and needs to be replaced (pilot assembly.)
DIAGRAM 24
