18
Timber Ax
WARNING:
Do not remove the locking pin
for any reason when one or more knives are
missing from the rotor assembly. The
imbalance could cause the rotor to turn without
warning causing serious personal injury.
Rotor Locking Pin Installation
WARNING:
Rotor must be stabilized with
rotor locking pin to prevent accidental rotation
any time the rotor is exposed for service work.
The rotor lock pin (1) with clip (2) is stored on the frame
inside the right side arm.
Use the rotor lock pin to keep the rotor from spinning
when performing any work or maintenance on the rotor
or knives, or when transporting the Timber Ax.
Remove the rotor lock pin and clip from the storage
position and insert pin into the locking hole (3) on right
side of the unit. Push the pin in completely and secure
with clip (2) from the inside the rotor as shown.
Return the pin to its storage position and secure with
the clip before operating the Timber Ax, or when work or
maintenance is finished.
CAUTION:
Do not operate the Timber Ax with
the locking pin inserted into the locking hole.
Severe damage to the Timber Ax could occur.
Set-up Instructions
1
2
3
2
Summary of Contents for Timber Ax 63TA
