LOFTNESS Timber Ax 63TA, Owner'S Manual

Page: 17 / 62

11 Timber Ax
Safety Instructions
Safety Decal Locations
Check and replace any worn, torn, hard to read or
missing safety decals on your machine.
1
4
5
2
2
1
2
3
Part No. N17013
Part No. N20661
Part No. N17014
WARNING
Due to the possible danger of flying debris,
it is absolutely MANDATORY that impact-resistant
shielding be provided on the power unit to
protect the operator.
The owner is responsible for providing the
operator protection devices on the power unit.
WARNING
Flying Debris can gather on the skid-loader and needs to
be cleaned off, especially around the radiator and oil cooler
screens, engine compartment and exhaust areas. Periodic
cleaning will help prevent the possibility of fire.
The adjustable push bar could contact the power
unit in some positions.
Before starting the power unit, set the push bar in the
most forward position, then slowly rotate the cutter
head back while an assistant checks for clearance.
Repeat this process in the other settings to determine
which positions are usable with your power unit.
WARNING
4
Part No. N28385
WARNING
IMPROPER CONNECTION TO THE POWER UNIT'S HYDRAULIC SYSTEM
COULD CAUSE SERIOUS COMPONENT DAMAGE AND PERSONAL INJURY.
This attachment can be configured with different components to operate on a variety
of power units, with or without case drain connections.
It is absolutely MANDATORY that you refer to your OPERATOR'S MANUAL for Set-up
Instructions and Pressure Ratings that apply to the components used on this unit.
The dealer/owner will be responsible for any damage caused by improper connection
to the power unit.
For technical assistance call Loftness/US Attachments at 800-828-7624
International: 320-848-6266 www.loftness.com
5
Part No. N13863