76
ENG
User Manual: Installation Of The Cooker
1.
When fitting the washer to the leg bolt
make sure the burr on the washer is facing
upward away from the leg top.
2.
Leg assembly with washer fitted correctly.
The lower part of the leg will unscrew to adjust
the height and level of the cooker.
3.
Leg insert cut out on base of oven. To fit
the legs to the appliance lie the cooker flat on its
back and fit all four legs.
DO NOT fit legs to the cooker by tilting the
appliance, doing so may damage the leg
assembly.
4.
Insert washer fitted to top of leg into base
of cooker and slide the leg along the channel.
5.
Screw the leg up tight so the oven base is
clamped between the washer and the top of the
leg. Once all four legs have been fitted lift cooker
onto the legs taking care to distribute the weight
evenly onto all four legs at the same time.
DO NOT tip the appliance onto its legs, always
lift the appliance onto its legs. (This will require
two people)
3.5 Leg fitting instructions
