74
WARNING:
when the top is in operation or the residual heat indicator is ON, take great care, and keep children
away.
Accessible parts of the oven can become very hot while the grill is operating. Children should be
kept at a safe sistance.
WARNING:
if the glass ceramic breaks, disconnect electric power and call in the Lofra Authorised
Service Centre.
LAY-OUT FOR CONNECTING KITCHEN GLASS CERAMIC WORKTOP
220-240 V ~
3 x 6 sq.mm
H05VV-F
380-415V 3N~
5 x 2,5 mmq
H05VV-f
3.9. FITTING THE FAT FILTER TO GIANT MULTIPLE-FUCTION OVEN
- Place tabs A-B in line with the holes in the fan cover A1-B1 at back of the
oven.
- Press rod C so that the tabs fit perfectly into the holes A1-B1.
3.10. FITTING THE GAS BURNERS TO THE HOB
Burners: auxiliary, semi-rapid, rapid, super rapid:
To fit the burners,
flame diffusers and the enamel burner caps correctly in the
hob cups, follow the sequence illustrated in figure. Ensure that the cup burner
guides and the burner flame diffuser guides are matched
perfectly.
Treble crown burner:
fit the flame diffuser to the burner support so that it cannot
rotate.
ATTENTION: the treble crown burner caps must always sit perfectly in their
seats. If they are not, the flame may return inside and deform the burner by
progressive overheating.
Fish kettle:
fit the flame diffuser by placing the hole in the bottom part over
the electronic ignition candle in the hob cup.
3.11. TELESCOPIC RUNNERS (only for certain models)
The telescopic runners guarantee greater stability to the oven accessories.
Placing the food on the shelves or on the tray is easier and safer.
The shelves and trays must be securely fitted into their housing on the runners.
We recommend using oven gloves during cooking or while the oven is still hot.
3.13 TRAY WITH ANTI-FALL DEVICE
The tray are equipped with safety system to prevent its extraction out of the
oven.
Inserting check that the anti-fall device (see picture) is always in the back.
The tray are extracted from the oven only if raised before.
